Tab Wall Light - Brass

Description

Description
The Tab is a small square wall fitting that reads as a neat brass block against the wall. A clear polycarbonate front sits flush across its face, with the built-in LED behind, so light leaves it as a controlled, even wash rather than a sharp point. Lit, the plate glows quietly at its centre; off, it holds as a plain metal square standing barely clear of the surface.

At only 100mm square and 36mm deep it keeps a very low profile, which suits a hallway, an entrance or a bedside spot where a bulkier fitting would crowd the wall. Its face gives a warm 3000K tone spread across the polycarbonate, so the effect is soft on the eye and easy to place beside a mirror or in a run along a corridor.

The body is aluminium in a brass finish and the diffuser is clear polycarbonate. Its integrated LED draws 24W for 2450 lumens at 3000K warm white, rated for around 30,000 hours, so no separate lamp is ever fitted or replaced. It runs on a standard switch without dimming and carries an IP20 rating for dry indoor rooms, arriving ready to mount with the module already in place.

Specification

Number of lights
1

Light source
Integrated LED, 24W total (2450lm, 3000K, 30,000h, included)

Colour temperature
3000K (warm white)

Width
100mm

Height
100mm

Projection
36mm

IP rating
IP20

Dimmable
No

Frame / Structure finish
Brass powder-coated aluminium

Diffuser / Glass
Clear polycarbonate

Materials
aluminium, polycarbonate

Downloads
Datasheet

Assembly Instructions

3D Model

Frequently Asked
What kind of light does the Tab give?

A soft, even wash at 3000K warm white. The LED sits behind a clear polycarbonate front across the whole face, so the output spreads gently rather than throwing a beam, which keeps it easy on the eye beside a mirror or along a hallway.

Does it need a bulb, or is one supplied?

No bulb is bought or fitted. An integrated LED rated at 24W and 2450 lumens is built into the fitting and included, good for around 30,000 hours of normal use, so it lights on the first evening with nothing extra.

Can it be dimmed?

This model switches at a fixed output on a standard wall switch and does not dim. If a variable level matters we can point you to an alternative in the same style that supports it.

How big is it and where does it suit?

It measures 100mm square and stands just 36mm off the wall. That slim footprint fits a hallway, an entrance or a bedside position where a deeper fitting would feel heavy.