Sequence LED Ceiling Light - Satin Brass

Description

Description
The Sequence ceiling light draws a single ribbon of brass through the air, spiralling around a matt black bar so the integrated LED reads as a continuous glowing line. It puts out 5000 lumens from 41W, and the colour is selectable across three tones: 2300K, 3000K and 4000K neutral white, set with a DIP switch on the fitting itself. An onboard SWITCH dimmer steps the output between 100%, 50% and 25% using a standard wall switch.
At 90cm wide and just 20.5cm high, it sits close to the ceiling, which makes it a sensible pick for living rooms and bedrooms where headroom is tight. The sweeping curve gives a modern look without needing a long drop.
The frame is aluminium in a satin brass and matt black pairing, weighing 1.3kg. It is surface-mounted and rated IP20 for dry indoor rooms. The LED is integrated, so there are no bulbs to fit or replace.

Specification

Width
90cm

Height
20.5cm

Depth
14.5cm

Finish
Satin Brass

Material
Aluminium

IP Rating
IP20

Light source
LED (integrated)

Wattage
41W

Lumens
5000lm

Colour temperature
2300K / 3000K / 4000K (selectable)

CRI
Ra 80

Dimmable
Yes

Net weight
1.3kg

Manufacturer's LED warranty
5 years

Downloads
Installation manual (PDF)

Dimensional drawing (PDF)

Frequently Asked
How is it fitted?

It is a surface-mounted ceiling fitting, and at 20.5cm high it suits rooms with limited headroom.

Can I change the light colour?

Yes. A DIP switch on the luminaire sets three tones: 2300K, 3000K or 4000K neutral white.

Is it dimmable?

Yes. An integrated SWITCH dimmer steps between 100%, 50% and 25% brightness using a conventional wall switch.

Can I use it in a bathroom?

No. It is rated IP20 and is intended for dry indoor rooms such as living rooms and bedrooms.