Basmorne Square Flush Ceiling Light - Black

Description

DescriptionThe Basmorne is a square flush ceiling light: a neat black aluminium cube that sits tight against the ceiling and aims its light downwards. It measures 10cm long, 10cm wide and 12cm high, small enough to read as a crisp block of colour rather than a bulky shade. Inside, the bulb sits well back within a square opening whose walls slope inwards, so it is tucked into the body rather than hanging below it. It takes a GU10 bulb, which is not included, and its IP20 rating settles where it belongs: indoors, in dry rooms.
Because it sits close to the ceiling and sends light downwards, it suits places where a pendant would hang too low or get in the way: a hallway or landing with a low ceiling, above a kitchen worktop, over a dining table, or spaced along a corridor. Several fitted in a line or a grid give a tidy, architectural look, and the black finish stands out sharply against a white ceiling or sits quietly within a dark one. Choosing your own GU10 bulb means you decide the colour of the light and how bright it is, and you can change either later without replacing the fitting.
The body is aluminium, a light metal that does not rust, and the whole fitting weighs 0.54KG, so it puts very little load on the ceiling. The black runs inside the opening as well as across the outer faces, which gives a clean, even look. There is no switch on the light itself: it is switched at the wall and runs on 220-240V, 50/60Hz mains. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions come as a download. Have a GU10 bulb ready on fitting day, as one is not supplied in the box.
Specification

Body Material
Aluminium

Body Colour
Black

IP Rating
IP20

Light Source
GU10 (bulb not included)

Length
10cm

Width
10cm

Height
12cm

Weight
0.54KG

Protection Class
Class I

Voltage
220-240V, 50/60Hz

Operating Voltage
220-240V, 50/60Hz

Switch
None (switched at the wall)

DownloadsInstallation Instructions (PDF)
Frequently AskedCan I use this ceiling light in a bathroom?
It is rated IP20, which suits indoor, dry rooms only, so keep it out of bathrooms and away from water.
Which bulb does it take?
It takes a single GU10 bulb, which is not included, so you can choose the colour of light and the brightness that suit your room.
How big is the light?
It is 10cm long, 10cm wide and 12cm high, a compact square body that sits close to the ceiling and weighs 0.54KG.
What material is the body?
The body is aluminium with a black finish, and the black carries inside the square opening as well as across the outer faces.
Does it have its own switch?
No, there is no switch on the light itself. It is switched at the wall and runs on 220-240V, 50/60Hz mains.