Emberix 4 Light Flush Ceiling Light - White

Description

Description
The Emberix is a 560mm square flush ceiling light housing four GX53 bulbs behind a white metal faceplate. The flush-mount design sits close to the ceiling with a 510mm projection, making it suitable for rooms with ceiling heights below 2.4m where a pendant or semi-flush fitting would hang too low. Each of the four circular apertures holds a separate GX53 bulb, distributing light evenly across the 560mm span.

Designed for larger living rooms, kitchens and hallways needing ambient ceiling light without height clearance for hanging fittings, the Emberix covers a floor area of approximately 12-16m² depending on ceiling height and bulb wattage. The dimmable GX53 sockets allow light levels to be adjusted via a compatible wall dimmer, giving flexibility between full daytime brightness and softer evening levels. The four-bulb configuration spreads illumination more evenly than a single central source, reducing shadows in corners.

The white powder-coated metal frame provides a neutral finish that pairs with white ceilings and modern interiors without adding visual weight. The square footprint and clean geometric layout of the four apertures give the fitting a contemporary character that works in minimalist, Scandinavian and modern residential settings. The IP20 rating limits the fitting to dry indoor use — it is not suitable for bathrooms or outdoor installations.

The GX53 bulb base is a low-profile twist-lock format designed specifically for flush and semi-flush ceiling lights where standard E27 or GU10 bulbs would protrude too far. GX53 LED bulbs are widely available in warm white (2700K-3000K) and cool white (4000K-5000K) temperatures, typically in 6W, 9W or 11W outputs. Bulbs are sold separately.

Specification

Length (mm)
560

Projection (mm)
510

Dimmable
Yes

Number Of Bulbs
4

Bulb Type
GX53

IP Rating
IP20

Warranty
5 Years

Height (mm)
30

Frequently Asked
Is this suitable for low ceilings?

Yes. The flush-mount design sits close to the ceiling with only a 510mm projection, making it a good choice for rooms with ceiling heights below 2.4m where pendant or semi-flush fittings would hang too low and create head clearance issues.

What bulbs does it take?

The Emberix takes four GX53 bulbs (sold separately). GX53 is a twist-lock base designed for low-profile ceiling fittings. LED GX53 bulbs are available in warm white (2700K-3000K) and cool white (4000K-5000K), typically in 6W, 9W or 11W outputs.

Is it dimmable?

Yes. The fitting is dimmable when paired with dimmable GX53 LED bulbs and a compatible wall dimmer. Check the bulb packaging to confirm dimmer compatibility before purchasing bulbs.

Can it be used in a bathroom?

No. It is rated IP20, so it is for dry rooms only. It is not rated for any area where it may be exposed to moisture or splashing.