CCT Remote Control LED Controller Wireless - White

Description

Description
Decoded from the article code REMOTE L 1 MONO/CCT-W, this is a single-zone handheld remote control for adjusting tunable white (CCT) LED systems. It runs on a 2.4GHz RF connection and a 3V DC battery, communicating with a matching CCT receiver rather than emitting any light itself. The white plastic housing is light to hold and gives simple control over brightness and the warm-to-cool balance across a connected run.

Rated IP20, it is built for dry indoor use, sitting on a desk or wall bracket in a kitchen, living room or office. RF control means it does not need line of sight to the receiver, so it works through cabinetry and across a room. We also stock the CCT LED strips and the matching drivers and receivers this remote pairs with.

Specification

Input voltage
3 DC

Colour mode
CCT

IP rating
IP20

Detection / control
RF 2, 4GHz

Material
Plastic

Colour
White

Frequently Asked
What does this remote control?

It controls tunable white (CCT) LED systems through a compatible RF receiver, letting you adjust the brightness and the warm-to-cool white balance of a connected run. It is a single-zone handset, so it pairs with one receiver and the LEDs wired to it.

Does it need line of sight to work?

No. It uses a 2.4GHz RF signal rather than infrared, so it works without line of sight and through obstacles such as cabinet doors or across a room. This makes it more flexible than a standard IR remote.

Is it suitable for outdoor use?

No. It is rated IP20 for dry indoor use only, so keep it clear of damp, splashes and exposed outdoor locations. Use it indoors on a wall bracket or desk.

How is it powered?

The handset runs on a 3V DC battery, so there is no wiring required for the remote itself. Only the receiver it pairs with needs to be connected to the LED system and its driver.

Downloads
Product Specification Sheet

Range Datasheet