Saltar al contenido

Menú

Fused Spur Modules

13A Fused Module - Matt White Grid Insert

Original price was: MX$200.Current price is: MX$86. IVA incluido

Entrega estimada: Wed 18 Nov – Sun 22 Nov

Envío y entrega

Devoluciones y reembolsos

Devoluciones gratuitas durante 30 días

Description

Description

Description
The Knightsbridge 13A fused module is a single-width grid insert that houses a replaceable 13A cartridge fuse for appliance circuit protection. The module measures 24.8mm wide and clips into Knightsbridge grid mounting frames from the front without requiring tools, allowing it to be positioned alongside switches, sockets and other grid modules in a modular faceplate configuration.

Designed for fixed appliance installations such as cooker hoods, water heaters, boilers and extractor fans where local fused isolation is required, the module provides accessible fuse replacement without needing to access the consumer unit. The fuse can be withdrawn using the embossed rocker mechanism on the front face, which releases the cartridge carrier for inspection or replacement. Mounting frames are sold separately and available in various gang configurations to suit different installation requirements.

The module body is constructed from ABS with steel mounting clips, finished in matt white to match standard grid ranges. The 35mm minimum mounting box depth allows installation in standard back boxes, and the IP20 rating makes the module suitable for dry indoor locations. The 25-year warranty covers manufacturing defects and mechanical failure of the mounting mechanism.

Specification

Height
56.3 mm

Width
24.8 mm

Projection
2.5 mm

Recessed Depth
21.2 mm

Min. Mounting Box Depth
35mm

Construction
ABS

Construction 2
& steel

Finish
Matt White

IP Rating
IP20

Primary Voltage
230V 50Hz

Warranty
25

Downloads
Product Specification Sheet

Frequently Asked
What mounting frame does this module require?

The module clips into Knightsbridge grid mounting frames, which are sold separately. Single-width modules like this fit into any grid frame configuration alongside other grid switches, sockets and modules. The frame is fixed to the back box first, then the module clips in from the front.

How is the fuse replaced?

The embossed rocker mechanism on the front face releases the fuse carrier, allowing you to withdraw the 13A cartridge fuse for inspection or replacement without removing the module or disturbing the wiring.

What appliances is this suitable for?

The 13A fused module is typically used for fixed appliances requiring local fused isolation, such as cooker hoods, extractor fans, water heaters, boilers and towel rails. It provides accessible fuse replacement at the point of use rather than at the consumer unit.

Can it be installed in a bathroom?

No. It is rated IP20, so it is for dry rooms only. For wet or damp areas, higher IP-rated products are required.

Crea tu conjunto

13A Fused Module - Matt White Grid Insert
INCLUIDO

13A Fused Module - Matt White Grid Insert

Original price was: MX$200.Current price is: MX$86. IVA incluido
1 ARTÍCULO SELECCIONADO

Bolsa de compra