20AX DP Grid Switch Module - Matt Black

Description

Description
The Knightsbridge 20AX DP grid module is a single-gang switch unit designed for the Knightsbridge modular grid system, finished in matt black. The module clips into grid mounting frames (sold separately) from the front, allowing switch configurations to be built up from individual modules rather than fixed multi-gang plates. The 20AX rating handles loads up to 4,600W on 230V mains, making it suitable for high-draw appliances, water heaters and lighting circuits.

Used in kitchens, utility rooms, workshops and commercial environments where modular control is preferred over fixed switch plates, the grid system allows users to combine different module types (switches, sockets, dimmers, data ports) within a single frame. The double pole switching isolates both live and neutral lines when off, providing additional safety over single-pole switching for high-power loads. The module requires a 35mm minimum back box depth and occupies one grid position within a 2, 3, 4 or 6-module frame.

The matt black rocker sits in a white ABS surround with steel internal contacts. The low-sheen black finish resists fingerprints and pairs with both contemporary and industrial interiors. Each module measures 56.3mm high by 24.8mm wide, with 5mm wall projection and 18.7mm recessed depth behind the mounting frame. The IP20 rating makes it suitable for dry indoor locations only.

Specification

Height
56.3 mm

Width
24.8 mm

Projection
5 mm

Recessed Depth
18.7 mm

Min. Mounting Box Depth
35mm

Construction
ABS

Construction 2
& steel

Finish
Matt Black

IP Rating
IP20

Primary Voltage
230V 50Hz

Warranty
25

Downloads
Product Specification Sheet

Frequently Asked
What mounting frame do I need?

This module requires a Knightsbridge grid mounting frame, sold separately. Frames are available in 2, 3, 4 and 6-module widths and multiple finishes. The module occupies one grid position within the frame.

What does 20AX mean?

20AX indicates the module is rated at 20 amps and suitable for loads up to 4,600W on 230V mains. This is higher than standard 10AX switches and makes it suitable for high-draw appliances and water heaters.

Can it be used in bathrooms?

No. It is rated IP20, so it is for dry rooms only.

What other finishes are available?

Knightsbridge produces grid modules in a range of finishes including polished chrome, brushed chrome, white, black nickel and stainless steel. Use the search function or filters to find other variants in stock at Niori.