24W LED Module CCT Colour Selectable Mains Light Engine

Description

Description
Decoded from the article code MOD 12-24W-CCT, this is a 24W mains-voltage LED light engine that runs directly from a 220-240V AC supply with its own integrated driver, so no separate or external driver is needed. It is colour selectable across 3000K, 3500K, 4000K, 5000K and 6500K, letting one part cover warm white through to daylight without holding several stock lines. The white module emits light from a compact board built to sit inside an existing fitting.

It works as a retrofit replacement for an ageing 2D or CFL module, dropping into bulkheads, ceiling fittings and downlight bodies to bring an old housing up to current LED output. The CCT selection is set at install, so the same module suits a warm hallway or a cooler utility area from one box. We also stock other LED light sources and replacement modules in our range to match a variety of fitting types and wattages.

Specification

Power
24W

Colour temperature
3000/3500/4000/5000/6500

Supply
220-240V AC (integrated driver)

Colour
White

Frequently Asked
Does this LED module need a separate driver?

No. This is a mains-voltage module with an integrated driver, so it wires directly to a 220-240V AC supply. You do not need a separate or external driver.

What does this module replace?

It is designed as a retrofit light engine for older 2D and CFL modules. It suits bulkheads, ceiling fittings and downlight bodies where you want to upgrade the existing housing to LED.

How do I set the colour temperature?

The module is colour selectable across 3000K, 3500K, 4000K, 5000K and 6500K. The tone is chosen at the point of installation, so one part covers warm white through to daylight.

Is this module suitable for outdoor use?

No. It has no stated IP rating, so it is for dry indoor rooms only. It should be fitted inside a suitable enclosure or luminaire rather than exposed directly.

Downloads
Product Specification Sheet

Range Datasheet