4ft CCT & Power Adjustable LED Batten - White
Original price was: MX$874.MX$376Current price is: MX$376. IVA incluido
Envío y entrega
Devoluciones gratuitas durante 30 días
Description
Description
DescriptionA 4ft LED batten with two things you choose at installation rather than at the point of order: the colour of the white light it gives, and the power it runs at. One code therefore covers several outputs and several shades of white, which is why a selectable batten is a useful thing to keep in the van or on the shelf. The light source is built into the fitting, so there is no separate tube to buy now or to replace later. The body is white, with a long translucent diffuser running its length and a rounded end cap.
Battens are surface mounted, fixed straight onto a ceiling or a wall, and this length suits a single or double garage bay, a workshop bench, a utility room, a store cupboard, a loft or a stockroom behind a shop counter. The diffuser spreads the output rather than throwing it in a tight cone, so the light lands evenly across a floor or a worktop instead of leaving hard pools. Run two or more in a line along a longer space. No IP rating is stated by the manufacturer, so plan it into a dry indoor position.
Both settings are made on the fitting itself before it goes up, so decide the look you want while the unit is still in your hands: a warmer white for a space you sit in, a cooler white for close work and colour matching. Day to day it runs from an ordinary wall switch. The manufacturer does not say whether it can be dimmed, so do not wire it to a dimmer without confirming that first. It is sold as one fitting, with a minimum order of one. It sits alongside our wider range of battens, which runs from 2ft to 5ft and includes IP65 T8 tube fittings and an emergency tri-proof version.
Specification
Type
Surface mounted LED batten
Light source
Integrated LED
Wattage
Selectable output; the manufacturer does not state the wattages offered
Colour temperature
Adjustable on the fitting; the manufacturer does not state the settings offered
Size
4ft
Finish
White
IP rating
Not stated by the manufacturer
Dimmable
Not stated by the manufacturer
Sold as
One fitting
Minimum order
1, sold in multiples of 1
Frequently AskedWhat does power adjustable actually mean on a batten?
It means the output is chosen on the fitting at installation instead of being fixed in the factory, so one unit can be set high for a workshop or lower for a quieter space. The manufacturer does not publish the available wattage steps, so check the label on the unit before you wire it in.
What does the CCT setting change about the light in the room?
It changes the shade of white. A warmer setting looks softer and more domestic, a cooler one looks crisper and helps with close work, sorting and colour matching. The manufacturer does not state which colour temperatures this fitting offers, so set it in your hands and look at it before fixing.
Can I put it on a dimmer switch?
The manufacturer does not say whether it can be dimmed and no dimming information is printed on the retail pack, so we cannot claim it. Treat it as a switched fitting unless the paperwork in the box confirms otherwise.
Do I need to buy a tube for it?
No. The LEDs are built into the fitting, so there is nothing to slot in at installation and nothing to swap out later. You wire it in, set the two selectors and fix it up.
Can it go on a wall rather than a ceiling?
Yes. A batten is a surface mounted fitting, so it screws flat to a ceiling or a wall as long as the mounting surface is sound and the cable can be brought to it neatly.
How many should I run in a garage?
Most single garages take two in a line down the length of the bay rather than one in the centre, which keeps the light off the back of your head when you are working over a bonnet or a bench.
Crea tu conjunto





