Aethera 1 Light E27 Ceiling Lamp Holder - White

Description

DescriptionThe Aethera 1 Light E27 Ceiling Lamp Holder is the body of a modular ceiling light: a round white ceiling rose with a short cylindrical holder beneath it, 85mm across and 90mm tall. It arrives without a lampshade and without a bulb, so on its own it is not a complete light. To finish it, you add an Aethera lampshade from the same range, sold separately, and an E27 bulb of your choice. Its IP20 rating settles where it belongs: indoors, in dry rooms only.
Because it sits close to the ceiling rather than hanging low, it suits rooms where a pendant would feel in the way: a hallway, a landing, a bedroom or a study. The white finish keeps the fitting quiet against a white ceiling, so the shade you choose carries the look of the room. We like the freedom that gives you. The shade is a separate choice, so you can pick the Aethera lampshade that suits the room today and swap it for another from the same range later, without replacing the fitting on the ceiling.
The holder takes a standard E27 screw bulb, which you buy separately, with a maximum of 42W. The maker states it needs no separate power supply. It runs on 220-240V AC and is not dimmable, so it suits an ordinary on and off switch rather than a dimmer. At 0.3KG it is a light fitting in both senses, and as with any mains product, it is installed by a qualified electrician. Order your lampshade and bulb at the same time, and the light is complete on the day it is fitted.
Specification

Diameter
85mm

Height
90mm

Lamp Fitting
E27

Maximum Wattage
42W

Bulb Included
No

Not Included
Lampshade

Dimmable
No

Finish
White

IP Rating
IP20

Class
Class II

Voltage
220-240V AC

Certification
CE

Weight
0.3KG

Warranty
5 Years

DownloadsInstallation Instructions (PDF)
Frequently AskedIs a lampshade included with this ceiling lamp holder?
No. It comes without a lampshade, so you need an Aethera lampshade from the same range, sold separately, to complete the light.
Does it come with a bulb?
No bulb is included. It takes an E27 screw bulb with a maximum of 42W, which you buy separately.
Where can I fit it?
It is rated IP20, so it belongs indoors in dry rooms only, such as a hallway, landing, bedroom or study ceiling.
How big is the lamp holder?
It measures 85mm across and 90mm tall, and it weighs 0.3KG before you add a lampshade and a bulb.
Can I use it with a dimmer?
No. The lamp holder is not dimmable, so it is meant for an ordinary on and off switch rather than a dimmer.
What finish is the lamp holder?
It is finished in white, which keeps the fitting quiet on a white ceiling and lets your chosen Aethera lampshade set the look.