Aethera 3 Light E27 Pendant Light Fitting - White

Description

DescriptionThe Aethera three light pendant is the body of a modular light: a round white ceiling rose, slim suspension flexes and a central hub carrying three E27 lamp holders. It is sold without its shades, diffuser discs and bulbs, so on its own it is not a finished light. To complete it, you choose lampshades or diffuser discs from the Aethera range, sold separately, and add three E27 bulbs. The fitting is 24cm across and 227cm in overall height, and it weighs 1KG. Its IP20 rating settles where it belongs: indoors and dry only.
Because the shades are your choice, one fitting can take on quite different characters. Pair it with three matching lampshades over a dining table, or with diffuser discs in a living room, a bedroom or a wide hallway. With three lamp holders on one ceiling rose, a single ceiling point can light a broad table or a seating area without a row of separate pendants. The white finish sits quietly against a pale ceiling, leaving the shades you pick to set the tone of the room. It suits anyone who likes to plan a light piece by piece, or who may want a fresh look later without replacing the whole fitting.
The fitting runs on 220-240V AC mains, and the maker states that no separate power supply is required. Each holder takes an E27 bulb of up to 42W, three in all, and the fitting is not dimmable, so it belongs on an ordinary switch rather than a dimmer. The maker rates it for use between 0°C and 40°C. As a mains product, it should be installed by a qualified electrician. Our practical advice: with an overall height of 227cm, check that figure against your ceiling height before ordering, and buy the shades and bulbs at the same time so the light is complete once it is fitted.
Specification

Diameter
240mm

Overall Height
2270mm

Lamp Fitting
3 x E27

Maximum Wattage
3 x 42W

Bulb Included
No

Not Included
Lampshade, diffuser disc

Dimmable
No

Finish
White

IP Rating
IP20

Class
Class II

Voltage
220-240V AC

Operating Temperature
0°C to 40°C

Certification
CE

Weight
1KG

Warranty
5 Years

DownloadsInstallation Instructions (PDF)
Frequently AskedDoes the Aethera pendant come with shades?
No. It is sold without lampshades, diffuser discs and bulbs. You add lampshades or diffuser discs from the Aethera range, sold separately, plus three E27 bulbs.
What bulbs does this pendant take?
It takes three E27 bulbs of up to 42W each. Bulbs are not included, and the fitting is not dimmable, so it suits an ordinary switch rather than a dimmer.
Where can I use an IP20 pendant?
IP20 means indoors and dry only, so this fitting suits rooms such as a dining room, a living room, a bedroom or a hallway.
How big is the fitting?
It is 24cm across and 227cm in overall height, and it weighs 1KG, so it is worth checking the height against your ceiling before ordering.
Does it need a separate driver or power supply?
No. The maker states that no separate power supply is required, and the fitting runs on 220-240V AC mains with E27 bulbs.
What finish is the fitting?
The fitting is finished in white, a neutral choice that sits quietly against a pale ceiling and lets the shades you choose lead the look.