Amel 2 Light Wall Light - Black Chrome
Original price was: MX$2.311.MX$994Current price is: MX$994. IVA incluido
Envío y entrega
Devoluciones gratuitas durante 30 días
Description
Description
Description
The Amel is a 2-light wall light with a black chrome backplate and curved twin arms, each holding a tulip-shaped glass shade with frosted outer layer and clear inner glass. The fitting comes supplied with two 9W GU10 LED bulbs in 2700K warm white, giving a combined 18W output at mains voltage.
Designed for hallways, living room side walls, or either side of a mirror or artwork, the Amel provides ambient wash light rather than directed task light. The 200mm width and 160mm projection suit walls where you need paired light sources without a large footprint, bedroom feature walls, or beside an entrance console.
The black chrome finish is applied over a metal frame and has a high-gloss polished surface that reflects surrounding light, making it stand out more than matt black finishes. The frosted outer glass layer on each tulip shade diffuses the GU10 beam into a soft glow, while the clear inner glass creates a second layer of depth when the light is on. At 1kg total weight, the fitting mounts to standard UK wall fixings without needing additional support.
The GU10 bulbs are non-dimmable as supplied. The fitting accepts any standard GU10 replacement bulb, so you can swap to a different colour temperature or brightness if needed in future.
The fitting is designed for dry indoor use.
Specification
Colour Finish 1
Black Chrome
Shade Colour
Frosted & Clear
Width
200mm
Height
130mm
Projection
160mm
Number Of Bulbs
2
Lamp Socket
L1/SGU10
Colour Temperature
2700K Warm White
Power Consumption
18W
Voltage
220-240V~50/60Hz
Dimmable
No
Weight
1KG
Warranty
1 Year
Frequently Asked
Are the bulbs included?
Yes. The Amel comes supplied with two 9W GU10 LED bulbs in 2700K warm white. These are pre-fitted and ready to use on installation.
Is the Amel dimmable?
No. The supplied GU10 bulbs are non-dimmable. Attempting to use the fitting with a dimmer switch may cause flickering or damage to the bulbs.
Can I use this in a bathroom?
No. It has no stated IP rating, so it is for dry rooms only.
What replacement bulbs can I use?
The fitting accepts any standard GU10 bulb. Check the Specification table for the maximum wattage rating. We suggest replacing with GU10 LED bulbs between 4-9W, choosing 2700K for warm white or 4000K for cooler white depending on room use.
Crea tu conjunto





