CCT Remote Control 110mm for LED Controllers - White
Original price was: MX$819.MX$352Current price is: MX$352. IVA incluido
Envío y entrega
Devoluciones gratuitas durante 30 días
Description
Description
Description
This handheld remote control measures 110mm and works with tunable-white LED controllers and receivers. The article code REMOTE CCT marks it as the colour-tone handset in the range, sending RF 2.4GHz signals to the paired receiver so a connected run can be switched, dimmed and shifted between warm and cool white tones from across the room. It runs on two button cells (2 x 1.5V DC) and houses in a white plastic case sized 110 x 53 x 21 mm.
The 2.4GHz radio link means the remote does not need line of sight to the fitting, so it works through furniture and from an adjacent room. Rated IP20, it is for dry indoor use only and should be kept out of bathrooms and outdoor positions. It pairs with a matching CCT receiver or controller rather than acting on a fitting directly. We also stock the tunable-white LED strips and 12V/24V drivers this remote is designed to pair with.
Specification
Input voltage
2 x 1, 5 DC
Colour mode
CCT
IP rating
IP20
Detection / control
RF 2, 4GHz
Material
Plastic
Colour
White
Dimensions
110 × 53 × 21 mm
Frequently Asked
What does this remote control?
It controls tunable-white LED runs through a compatible CCT receiver or controller, letting you switch them on and off, adjust brightness and shift the white tone. It does not connect to the strip directly, so a matching receiver is needed in the circuit.
How far does the remote reach?
It uses an RF 2.4GHz radio link rather than infrared, so it does not need line of sight to the receiver. This lets it operate through furniture and walls within a typical room or adjacent space.
Can it be used in a bathroom or outdoors?
No. It is rated IP20 for dry indoor use only and should be kept clear of bathrooms, damp areas and outdoor positions. Mount the receiver and remote in a dry location.
What powers the remote?
It runs on two 1.5V DC button cells, so there is no wiring or mains connection for the handset itself. Replace the cells when the range or response begins to drop off.
Downloads
Product Specification Sheet
Range Datasheet
Crea tu conjunto





