Fable LED Single Spotlight - Brass

Description

Description
The Fable is a single-head adjustable spotlight with a brass-finished metal housing and an integrated GX53 LED bulb. The cylindrical head tilts on a ball-and-socket mount fixed to a circular backplate, allowing the beam to be angled up, down or sideways to direct light onto specific surfaces or objects.

Designed for accent and task lighting, the Fable works above kitchen worktops, in hallways to highlight artwork, or on gallery walls to pick out framed prints and shelving. The 120mm projection from the wall gives enough clearance to angle the head without shadowing the backplate. The IP20 rating restricts use to dry indoor zones, so the fitting is not suitable for bathrooms or outdoor positions.

The brass finish on the metal housing presents as a warm satin gold tone rather than high-polish yellow brass, which softens reflections under daylight and pairs with both warm neutrals and cooler greys. The GX53 bulb sits recessed inside the head with a white internal reflector to prevent glare when viewed at an angle. The fitting is dimmable when paired with a compatible LED dimmer, allowing the light level to be adjusted for different tasks or times of day.

Specification

Length (mm)
85

Projection (mm)
120

Height (mm)
90

Dimmable
Yes

Number Of Bulbs
1

Bulb Type
GX53

IP Rating
IP20

Warranty
5 Years

Frequently Asked
Is the Fable dimmable?

Yes. The integrated GX53 LED is dimmable when paired with a compatible LED dimmer switch. Not all LED dimmers support all LED bulbs, so check compatibility with the specific dimmer model before installation.

Can this be used in a bathroom?

No. It is rated IP20, so it is for dry rooms only.

How much adjustment does the head have?

The head tilts on a ball-and-socket joint, giving approximately 180° of vertical tilt and 270° of horizontal rotation. This allows the beam to be directed at most wall, floor or ceiling surfaces within the fitting's range.

What is the GX53 bulb type?

The GX53 is a low-profile twist-and-lock LED bulb approximately 75mm in diameter and 30mm deep, commonly used in recessed downlights and compact spotlights. The bulb is integrated into the fitting and typically does not require user replacement during the product's lifespan.