Halion 3 Light Flush Ceiling Light - Brass

Description

Description
The Halion is a 3-light flush ceiling fitting with three white blown glass disc diffusers clustered on a brass plated metal base. Each diffuser houses a GX53 bulb (sold separately) — a low-profile lamp format that allows the entire fitting to sit close against the ceiling at just 130mm projection. The glass itself is acid-etched and cased, giving it an opalescent white finish that softens and diffuses the light output.

Designed for low-ceiling spaces where a pendant would hang too far into the room, the Halion suits hallways, bedrooms, and residential landings with ceiling heights under 2.4m. The 460mm diameter base covers a standard ceiling rose and the clustered arrangement of the three discs provides both ambient light and a decorative focal point without taking up vertical headroom.

The brass plating on the metal base provides a warm metallic accent that pairs well with both traditional brass fixtures and warmer-toned contemporary interiors. The white glass diffusers contrast cleanly against the brass, giving definition to each disc and preventing the fitting from reading as a single amorphous mass when viewed from below. At 400mm projection from the ceiling, the fitting sits noticeably proud but remains within the low-ceiling zone where pendants would be impractical.

The Halion is dimmable when paired with dimmable GX53 bulbs and a compatible dimmer switch. The IP20 rating limits the fitting to dry indoor spaces. Ideal Lux backs the fitting with a 5-year warranty covering manufacturing defects and electrical components.

Specification

Length (mm)
460

Projection (mm)
400

Dimmable
Yes

Number Of Bulbs
3

Bulb Type
GX53

IP Rating
IP20

Warranty
5 Years

Frequently Asked
What bulbs does the Halion take?

The fitting takes three GX53 bulbs (sold separately). GX53 is a low-profile disc-format bulb with a two-pin twist-lock base, commonly available in LED versions between 5W and 11W. Most users pair this fitting with warm-white LED GX53s at 2700K-3000K.

Is the Halion suitable for low ceilings?

Yes. At 400mm projection from the ceiling and 460mm diameter, the Halion is designed specifically for spaces where a traditional pendant would hang too low. It works well in rooms with ceiling heights between 2.2m and 2.5m.

Can it be used in a bathroom?

No. It is rated IP20, so it is for dry rooms only. The IP20 rating means the fitting is suitable for dry indoor spaces.

Is it dimmable?

Yes, when paired with dimmable GX53 bulbs and a compatible dimmer switch. The fitting itself supports dimming but requires dimmable bulbs to function on a dimmed circuit.