INES E27 Round Bulkhead IP54 - White

Description

Description
The INES is a round bulkhead wall and ceiling light that takes a single E27 bulb up to 25W, running on a 220-240V AC mains supply. It accepts GLS, CFL or LED lamps, so the brightness and colour temperature follow whichever E27 bulb you fit rather than being fixed at the factory. The diffuser spreads light evenly outward and downward for a soft, glare-controlled wash across the surface it sits on.

Because the bulb is not included, output and coverage depend on the lamp chosen, so this is best judged by the bulb's own lumen rating rather than a fixed room area. It works well over a porch, in a carport, by a back door or along a sheltered passage, and indoors in a utility room, garage or hallway where a hard-wearing surface fitting suits better than a delicate shade. With both wall and ceiling mounting supported, it can sit beside an entrance or directly overhead. The light it gives is more about clear local marking and a welcoming pool near a threshold than lighting a whole room.

Construction is plastic with a white finish, rated IP54 against splashing and dust ingress and IK08 for impact resistance, which makes it suitable for bathroom zones and covered outdoor spots such as porches and carports, though not fully exposed positions, direct water jets or submersion. It weighs 1.01kg and fixes flat to a wall or ceiling, with the E27 holder wired directly to the mains. Dimming depends entirely on the bulb fitted, since the fitting itself has no integral driver. The INES range gives a straightforward, robust option wherever a sealed E27 bulkhead is needed.

Specification

Power
max 25W

Voltage
220-240 AC

IP rating
IP54

IK rating
IK08

Mounting
Wall Mounted, Ceiling Mounted

Cap / base
E27

Light source
GLS/CFL/LED

Weight
1.01 kg

Material
Plastic

Finish
White

Downloads
Product Specification Sheet

Range Datasheet

Frequently Asked
Can the INES be used outdoors?

Yes, within limits. Its IP54 rating makes it splash-resistant and suitable for covered or sheltered outdoor positions such as a porch, carport or doorway. It should not be used in fully exposed locations subject to direct rain, water jets or standing water.

Is a bulb included?

No, the bulb is supplied separately. The fitting takes a standard E27 lamp up to 25W and accepts GLS, CFL or LED types, so you can choose the brightness and colour temperature that suits the location.

Where is this bulkhead typically used?

It suits entrances, porches, carports, hallways, utility rooms and garages where a sealed, hard-wearing surface fitting is wanted. The IP54 and IK08 ratings also make it appropriate for bathroom zones and areas where knocks are likely.

How do I clean and maintain it?

Wipe the diffuser and white housing with a soft, damp cloth and a mild detergent, then dry it off, with the power switched off first. Avoid abrasive cleaners or solvents that could mark the plastic, and check the seal is seated correctly after changing the bulb.