Saltar al contenido

Menú

Led Strip Accessories

LED Under Cabinet Coupler - White

Original price was: MX$73.Current price is: MX$31. IVA incluido

Entrega estimada: Wed 18 Nov – Sun 22 Nov

Envío y entrega

Devoluciones y reembolsos

Devoluciones gratuitas durante 30 días

Description

Description

Description
The Knightsbridge LED under cabinet coupler is a white plastic connector designed to join two LED under cabinet light fittings end-to-end, creating a continuous run without visible gaps or external cables. The coupler measures 33mm long, 18mm wide and 10mm high, and carries live and neutral connections internally to link the electrical circuits of two adjacent fittings.

Used in kitchen installations where worktop or wall cabinet runs exceed the length of a single LED strip fitting, the coupler allows multiple fittings to be powered from a single connection point at one end of the run. The 230V rating matches standard Knightsbridge LED under cabinet fittings operating on mains voltage. The white finish blends with white or light-coloured cabinet undersides and light fittings.

The coupler is installed by sliding it into the connectors at the ends of two adjacent LED fittings until it clicks into place, with no tools or screws required for a mechanical connection. The electrical connection happens automatically when the coupler seats fully into both fittings. This design keeps cabling concealed inside the fittings rather than running externally between units.

Specification

Length
33 mm

Height
10 mm

Width
18 mm

Finish
White

Primary Voltage
230V 50Hz

Warranty
1

Downloads
Product Specification Sheet

Frequently Asked
Which Knightsbridge LED fittings does this coupler work with?

This coupler is designed for Knightsbridge's 230V mains-voltage LED under cabinet range. Check the connector type on your existing fittings before ordering, as different ranges use different connector profiles. If in doubt, contact us with your fitting model number.

Does it require tools to install?

No. The coupler slides into the connector slots at the ends of two adjacent LED fittings and clicks into place. The electrical connection is made automatically when the coupler is fully seated.

How many fittings can be joined in a single run?

The maximum run length depends on the total wattage of the fittings and the rating of the power supply or driver feeding the first fitting in the chain. Consult the installation instructions for your LED fitting range for the maximum number of fittings per circuit.

Can it be used outdoors or in bathrooms?

The coupler carries no IP rating and is intended for dry indoor use only, typically under kitchen wall cabinets or similar residential locations. It is not rated for bathrooms, outdoor use, or any environment where moisture is present.

Crea tu conjunto

LED Under Cabinet Coupler - White
INCLUIDO

LED Under Cabinet Coupler - White

Original price was: MX$73.Current price is: MX$31. IVA incluido
1 ARTÍCULO SELECCIONADO

Bolsa de compra