Lunaria 2 Light Flush Ceiling Light - White
Original price was: MX$3.058.MX$1.315Current price is: MX$1.315. IVA incluido
Envío y entrega
Devoluciones gratuitas durante 30 días
Description
Description
Description
The Lunaria is a 295mm square flush ceiling light with a white enamelled metal base and a sandblasted transparent glass diffuser secured with chromed metal fixings. The fitting sits flat against the ceiling, housing two E27 bulbs (sold separately) behind the diffuser, which spreads light evenly across the room without glare or hot spots.
Designed for bedrooms, hallways and utility rooms, the Lunaria suits rooms with ceiling heights of 2.2-2.6m where a pendant would hang too low. The 295mm square footprint covers a standard UK ceiling rose and provides enough light spread for rooms up to 12m² when paired with two 10-12W LED bulbs at 3000K. The flush mount projects only 80-90mm from the ceiling, leaving headroom clear.
The white enamelled finish on the metal base resists yellowing and pairs cleanly with white ceilings, while the sandblasted glass softens the light output without losing brightness. The chromed screws that hold the diffuser in place can be removed to access the bulb holders for relamping or cleaning. The fitting is dimmable when paired with dimmable E27 bulbs and a compatible dimmer switch.
Specification
Length (mm)
295
Projection (mm)
295
Dimmable
Yes
Number Of Bulbs
2
Bulb Type
E27
IP Rating
IP20
Warranty
5 Years
Height (mm)
80
Frequently Asked
What bulbs does the Lunaria take?
The fitting takes two E27 (Edison screw) bulbs, sold separately. Most users pair this with two 10-12W LED bulbs at 2700K-3000K for bedroom or hallway use, or 4000K for utility spaces.
Is it suitable for low ceilings?
Yes. The flush mount design projects only 80-90mm from the ceiling, making it well-suited to rooms with ceiling heights of 2.2m or lower where pendant lights would hang too low.
Can it be used in bathrooms?
No. It is rated IP20, so it is for dry rooms only.
How is the glass diffuser removed for cleaning?
The sandblasted glass diffuser is held in place by chromed metal screws. Unscrew these fixings to remove the diffuser for bulb replacement or to clean dust from the inside of the glass.
Crea tu conjunto





