Lunaria Wall Light - White
Original price was: MX$3.676.MX$1.581Current price is: MX$1.581. IVA incluido
Envío y entrega
Devoluciones gratuitas durante 30 días
Description
Description
Description
The Lunaria is a single-light wall fitting built around a white powder-coated metal frame with an adjustable arm and an exposed E27 bulb holder. The arm pivots from a circular wall mount, allowing the bulb position to be directed towards a reading chair, up onto a ceiling as wash light, or out from the wall as ambient light depending on the room's needs.
Designed for bedrooms, hallways and living rooms where adjustable task or accent lighting is needed without a fixed ceiling fitting, the Lunaria works well as a pair flanking a bed or sofa, or as a single fitting next to an armchair. The exposed bulb means the choice of lamp is visible when lit, so decorative filament LED bulbs, globe bulbs or vintage-style lamps pair well with the minimal white frame. The fabric-covered cable runs from the wall mount to the bulb holder, adding a slight textile detail to the otherwise clean metal construction.
The 240mm diameter wall mount provides a stable fixing point for the adjustable arm. The white powder-coated finish is matt and non-reflective, sitting comfortably in contemporary, Scandinavian and minimal interiors. The IP20 rating limits use to dry indoor areas only. The fitting is dimmable when paired with a compatible dimmer switch and a dimmable E27 LED bulb, allowing light levels to be adjusted from full task brightness down to soft ambient glow.
Specification
Diameter (mm)
240
Dimmable
Yes
Number Of Bulbs
1
Bulb Type
E27
IP Rating
IP20
Warranty
5 Years
Projection (mm)
240
Frequently Asked
What bulb does it take?
The Lunaria takes a standard E27 (Edison screw) bulb. Bulbs are sold separately. Most users pair this with a decorative filament LED or globe bulb in warm white (2700K-3000K) as the bulb is fully exposed when the fitting is installed.
Is it dimmable?
Yes. The fitting itself is dimmable-compatible, but the final result depends on using both a compatible dimmer switch and a dimmable E27 LED bulb. Non-dimmable bulbs will not dim even with a dimmer switch installed.
Can the arm be adjusted after installation?
Yes. The arm pivots from the wall mount, allowing the bulb position to be directed towards different areas of the room as needed. The joint holds position once set but can be repositioned by hand.
Can it be used in a bathroom?
No. The IP20 rating means the fitting is rated for dry indoor areas only and is not suitable for bathrooms, outdoor use, or areas with moisture or steam.
Crea tu conjunto





