Plastic Rings Lampholder E27 - White

Description

Description
The Plastic Rings Lampholder E27 is the part a lamp screws into, made up on the flex of a pendant or wired into a lamp. A white moulded lampholder shown as a stack of its parts: a plain cord entry standing up from a stepped body, a threaded skirt below that, and two separate shade rings sitting loose beneath. The body carries shallow ribs round each step, and the rings are flat collars with turned lips sized to trap a shade against the holder. Everything is one flat white with a slight sheen to the plastic. There is nothing decorative on it at all.

It is the part everything else is built around: a shade goes over it, a flex runs into it, and the lamp you choose sets how the light reads. It is a part rather than a finished fitting, so it is bought alongside whatever it is going to carry or connect to rather than on its own. That is the point of buying the pieces separately: the shade, the flex and the holder are each chosen on their own, and a run can be made up to a length and a drop that no finished pendant would give you.

The holder is E27. It is rated IP20, for dry indoor rooms.

Specification

Finish
White

Light Source
E27 lamp, not included

IP Rating
IP20

Suitable Location
Indoor, dry rooms

Downloads
Instruction manual (PDF)

Frequently Asked
Which bulb does it take?
An E27 lamp. Bulbs are supplied separately so you can choose the brightness and colour you want.

Can it be dimmed?
Yes, on a compatible dimmer, provided the lamp you fit is a dimmable one. The fitting has no dimmer of its own.

Can it go in a bathroom?
No. It is IP20, which covers dry interior rooms only. A bathroom needs IP44 or better.