Slim Round Surface Mounted Downlight - White

Description

Description
The Slim Round is an 8.5cm diameter surface mounted downlight built from white powder-coated aluminium with a cylindrical body and a silver reflector insert. The 11.5cm projection from the ceiling houses a single GU10 bulb fitting (bulb sold separately) that can accept any standard GU10 LED, halogen or compact fluorescent up to 50W.

Designed for internal spaces where flush-mounted downlights cannot be fitted due to shallow ceiling voids or concrete slab construction, the Slim Round mounts directly onto the ceiling surface using a rear fixing plate. It suits kitchens, hallways, home offices, utility rooms and commercial installations where focused downward light is needed without the requirement for recessed cut-outs. The IP20 rating restricts use to dry internal environments only.

The white finish on the aluminium body blends with white or off-white ceilings, reducing visual impact when the fitting is not in use. The internal silver reflector maximises light output and directs the beam downward rather than allowing spill across the ceiling. The 8.5cm diameter and compact cylindrical profile keep the fitting unobtrusive in rooms with lower ceiling heights or where multiple fittings are installed in a grid or line.

Specification

Height
11.5cm

Diameter
8.5cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GU10

Wattage
50

Warranty
2 Year Guarantee

Downloads
Product Manual

Frequently Asked
What bulb does it take?

The fitting takes a standard GU10 bulb up to 50W. Bulbs are sold separately. Most installations use a GU10 LED between 4-7W and 3000K-4000K for efficient task lighting.

Can it be used in bathrooms?

No. The IP20 rating restricts use to dry internal environments only. Bathrooms require IP44 or higher depending on zone placement.

How is it fitted?

The downlight mounts directly onto the ceiling surface using a rear fixing plate with screw holes. Mains wiring connects through a knockout cable entry on the rear. Installation should be carried out by a qualified electrician.

What ceiling clearance is needed above?

Surface mounted fittings require minimal clearance above the ceiling — typically just enough space for the cable entry and terminal block. This makes them suitable for concrete slab ceilings or shallow voids where recessed downlights cannot fit.