TM-3 LED Dimmer Controller White IP20

Description

Description
The TM-3 is a wired LED dimmer controller for adjusting the output of connected LED lighting. Decoded from the APO TM-3 article reference, it runs on a 220-240V AC mains input and carries an IP20 rating, so it is suited to dry indoor installations such as control panels, switch positions and accessible wiring points. Finished in white, it sits neatly alongside standard wall plates and enclosures.

Wired in line with the LED load it serves, the TM-3 lets you set and hold a chosen brightness level across compatible fittings. As a control module it is the adjusting hardware in the circuit rather than a light source itself. We also stock LED strips and matching LED drivers to build out the full controlled run.

Specification

Input voltage
220-240 AC

IP rating
IP20

Colour
White

Frequently Asked
What does the TM-3 control?

It is a wired LED controller that adjusts the brightness of compatible connected LED lighting. It sits in line between the supply and the LED load.

What is the maximum load it can handle?

Match the controller to the total wattage of the LED fittings on the circuit, staying within the rating of the driver or supply feeding it. Confirm the load figure against your installation before wiring.

Can I use it outdoors?

No. With an IP20 rating it is intended for dry indoor locations only and should be kept clear of moisture, splashing and exposed outdoor positions.

Does it support RGB or colour-changing strips?

The TM-3 is a single-channel brightness controller for standard LED loads. For colour or tunable-white effects you would need a controller matched to that strip type.

Downloads
Product Specification Sheet

Range Datasheet