Triplo Wall Light - White

Description

Description
The Triplo wall light uses a three-layer glass diffuser to create soft, ambient illumination. The base layer is a flat, transparent glass panel that sits against the wall. Two curved, acid-etched glass layers sit on top, creating a dimensional profile that diffuses light outward while concealing the bulb. Chrome-finished metal clips hold the glass layers in place and add small metallic accents at either side of the diffuser.

Designed for hallways, bedrooms, living rooms and staircases where soft ambient light is needed, the Triplo provides indirect illumination that washes walls without glare. The 275mm projection brings the diffuser forward from the wall, allowing light to spread both upward and downward. The single E27 fitting accepts LED, halogen or filament bulbs up to 60W (sold separately), and the fitting is fully dimmable when paired with a compatible dimmer switch.

The white finish on the acid-etched glass layers gives the diffuser a soft, frosted appearance when unlit, blending into neutral and light-toned interiors. When lit, the etched surfaces scatter light evenly across the curved profile, preventing hot spots and creating a glow rather than a focused beam. The chrome fittings contrast with the white glass without dominating the fixture, making the Triplo suitable for both contemporary and traditional settings.

Specification

Length (mm)
215

Projection (mm)
275

Dimmable
Yes

Number Of Bulbs
1

Bulb Type
E27

IP Rating
IP20

Warranty
5 Years

Frequently Asked
Is the Triplo dimmable?

Yes. The fitting is compatible with dimmer switches when paired with a dimmable E27 bulb. Both LED and halogen dimmable bulbs work, though the specific dimmer model may affect performance with LED bulbs.

What bulb does it take?

The Triplo takes a standard E27 (Edison screw) bulb up to 60W. Bulbs are sold separately. Most users pair this with a warm-white LED bulb between 6-10W and 2700K-3000K for ambient lighting.

Can it be used in bathrooms?

The IP20 rating means the Triplo is suitable for dry indoor locations only. It cannot be used in bathrooms, kitchens with high moisture, or any outdoor or damp locations.

How far does it project from the wall?

The fitting projects 275mm from the wall to the outermost point of the curved glass diffuser. This projection allows light to spread both upward and downward along the wall surface.