Wirmane LED Wall Light - Sand

Description

DescriptionThe Wirmane is a slim LED wall light in a sand finish, built from aluminium and steel. A narrow rectangular wall box carries a vertical LED bar under a white plastic diffuser, with a second slim rod in the same finish held alongside it on two short cross arms, so the light reads as a small piece of linear geometry even when it is not lit. It stands 45.5cm high and projects 15.5cm from the wall, with a length of 6cm. The integrated LED draws 12W and gives 1,450 lumens at 3000K, a warm light. Its IP20 rating settles where it goes: indoors, in dry rooms, and never in a bathroom or on an outside wall.
That 1,450 lumens is plenty of light for a single wall fitting, so it can do real work in a hallway, on a landing or beside a sofa in the living room, rather than simply marking the wall. The warm 3000K colour sits comfortably with wood, plaster and soft furnishings, and the sand finish is a gentle neutral that suits pale walls and warmer schemes alike. Because it projects only 15.5cm, it sits close enough to the wall for a narrow corridor. Fit a pair either side of a console table, a mirror or a bed for a balanced, symmetrical look.
The body is aluminium and steel and the diffuser is white plastic, while the LED is integrated, so there is no separate bulb to buy. It is not dimmable and has no switch of its own: it works from the ordinary light switch on the wall. It runs on 220-240V, 50/60Hz mains, has an energy class of E, and weighs 0.653KG packed. Because it is wired into the mains, it is installed by a qualified electrician, and the installation instructions come as a download, so whoever fits it has the

details to hand.
Specification

Length
6cm

Height
45.5cm

Projection
15.5cm

Body Material
Aluminium, steel

Body Colour
Sandy

Shade Material
Plastic

Shade Colour
White

Light Source
LED, integrated

Wattage
12W

Lumens
1,450lm

Colour Temperature
3000K

Dimmable
No

Switch
None (switched at the wall)

IP Rating
IP20

Protection Class
Class II

Voltage
220-240V, 50/60Hz

Energy Class
E

Weight (packed)
0.653KG

DownloadsInstallation Instructions (PDF)
Frequently AskedCan the Wirmane go in a bathroom?
No. It is rated IP20, which means it is made for dry indoor rooms only, so we would keep it away from bathrooms, wet areas and outside walls.
Is this LED wall light dimmable?
No, it is not dimmable. It has no switch of its own and is switched at the wall from the ordinary light switch in the room.
How bright is the light?
The integrated LED draws 12W and gives 1,450 lumens at 3000K, a warm light that suits living rooms, hallways and bedrooms.
How big is the wall light?
It stands 45.5cm high and projects 15.5cm from the wall, with a length of 6cm, so it sits neatly in a corridor or beside a bed.
Does it need a bulb?
No. The LED is integrated into the fitting, so there is no separate bulb to buy, and the diffuser over the LED is white plastic.
What colour is the sand finish?
It is a soft, sandy neutral on an aluminium and steel body, which sits well beside pale walls, natural wood and warmer colour schemes.