Dynamite Square Quad Spotlight - White

Description

Description
The Dynamite is a four-head adjustable spot clustered on a compact 135mm square plate, carrying four GU10 heads in a two-by-two block that each tilt and turn on their own. Because the four sit close together yet aim independently, a single ceiling point can send four beams outward: fanned across a corner of a room, angled at a group of pictures, or drawn together onto one spot below. Lit, it throws four directed pools of light; off, the square white plate sits flat and quiet against the ceiling.

Fixed to the ceiling from one fixing, the cluster works where you want several beams from a small footprint rather than a long bar: over a seating corner, above a stairwell or in a compact hall. The heads swing on a 141mm reach so each beam clears the plate and points where fixed downlights cannot aim.

The frame is powder-coated metal and the fitting is rated IP20 for dry indoor rooms. It takes four GU10 lamps, supplied with the plate, so it arrives ready to use, and the replaceable caps let you change brightness or beam later by swapping the bulbs.

Specification

Number of lights
4

Light source
4 x GU10 (max 28W each, bulbs included)

Colour temperature
Depends on bulb fitted

Width
135mm (square)

Projection
141mm

IP rating
IP20

Dimmable
No (dimmable with dimmable GU10 bulbs)

Adjustment
Each head tilts and rotates

Frame / Structure finish
White metal

Materials
Powder-coated metal frame

Downloads
Datasheet

Assembly Instructions

3D Model

Frequently Asked
What kind of light does the Dynamite give?

Four directed beams from a single compact plate. The GU10 heads sit in a two-by-two block and each tilts and rotates on its own, so the four can fan across a corner, pick out a group of pictures, or draw together onto one spot below rather than filling the room evenly.

Does it come with bulbs?

Yes. It is supplied with four GU10 lamps, so it works from the moment it is wired. The GU10 caps are replaceable, which lets you swap them later to change the brightness, beam angle or colour tone.

Can it be dimmed?

There is no dimmer built in, but because it runs standard GU10 lamps you can dim it by fitting dimmable GU10 bulbs on a compatible wall dimmer.

Where does the square plate suit?

It mounts on the ceiling from one point and the four heads adjust, so it works over a seating corner, a stairwell or a compact hall. At 135mm across it keeps a small footprint while still aiming four beams.