Dynamite Square Track Spotlight - White

Description

Description
The Dynamite is a small adjustable spot that clips onto a three-phase track rail, carrying one aimable GU10 head you can slide along the run and lock where light is wanted. The square body tilts and turns on its mount, so a single fitting points straight down, angles across a picture or grazes a shelf. Lit, it throws one directed beam; off, the crisp 80mm head sits as a neat white block against the rail, with a more architectural edge than a rounded spot.

Because it lives on a track rather than a fixed point, several heads can share one supply line and each aim at a separate target, then move whenever a display or worktop layout changes. Its 165mm height keeps the head clear of the rail so the beam swings freely, which suits a picture wall, a shop bay or a run of kitchen units where the focus shifts.

The frame is powder-coated metal in white and the fitting is rated IP20 for dry indoor rooms. It takes one GU10 lamp, so it works once clipped in and wired, and the replaceable cap lets you change brightness or beam later by swapping the bulb. It needs a compatible three-phase track, which we can supply alongside.

Specification

Number of lights
1

Light source
1 x GU10 (max 28W, bulb not included)

Colour temperature
Depends on bulb fitted

Length
80mm

Height
165mm

Projection
57mm

IP rating
IP20

Dimmable
No (dimmable with a dimmable GU10 bulb)

Adjustment
Head tilts and rotates

Mounting
Three-phase track adaptor

Frame / Structure finish
White metal

Materials
Powder-coated metal frame

Downloads
Datasheet

Assembly Instructions

3D Model

Frequently Asked
What kind of light does the Dynamite give?

One directed beam you can aim. The square GU10 head tilts and rotates on its track mount, so it points at art, a shelf or a work surface rather than filling the whole room evenly.

Does it come with a bulb?

Yes, it takes one GU10 lamp. The cap is replaceable, which lets you swap the bulb later to change the brightness, beam angle or colour tone without altering the fitting.

Can it be dimmed?

There is no dimmer built in, but because it runs a standard GU10 you can dim it by fitting a dimmable GU10 lamp on a compatible track circuit and wall control.

Does it need a track?

Yes, it mounts on a three-phase track rail rather than straight to the ceiling, so it slides and repositions along the run. We can supply matching track and feeds to build the layout.