Halion 3 Light Flush Ceiling Light - White

Description

Description
The Halion is a 3-light flush ceiling fitting with a white powder-coated metal base and three white acid-etched blown glass diffusers arranged in an overlapping cluster. Each diffuser houses a GX53 bulb (sold separately), and the glass treatment scatters light evenly across the ceiling and down into the room rather than projecting hard downward beams.

Designed for rooms with ceiling heights between 2.3m and 2.6m where a pendant would hang too low, the Halion's 400mm projection from the ceiling gives enough presence to function as a primary light source in living rooms, bedrooms and dining areas up to 15-18m². The flush mount design keeps the fitting close to the ceiling, leaving headroom clear in hallways and landings. The white powder-coated metal blends into white or light-coloured ceilings, while the frosted glass softens glare from the bulbs when viewed directly.

The 460mm length across the three diffusers gives the fitting enough scale to anchor a ceiling in a 4m x 4m room without overwhelming smaller spaces. The acid-etched glass finish is uniform across all three shades, producing consistent light distribution whether fitted with warm-white or cool-white GX53 lamps. The IP20 rating limits the fitting to dry indoor locations — it cannot be used in bathrooms or outdoor covered areas.

Specification

Length (mm)
460

Projection (mm)
400

Dimmable
Yes

Number Of Bulbs
3

Bulb Type
GX53

IP Rating
IP20

Warranty
5 Years

Frequently Asked
What bulbs does the Halion take?

The fitting takes three GX53 bulbs, sold separately. GX53 is a flat disc-shaped bulb with a 2-pin twist-and-lock base, commonly available in LED versions between 5W and 9W. Choose warm white (2700K-3000K) for living spaces or cool white (4000K) for task-lit areas.

Is the Halion suitable for low ceilings?

Yes. The 400mm projection from the ceiling makes this a semi-flush rather than a true flush fitting, but it suits ceiling heights from 2.3m upwards where a pendant would hang into the room. The design keeps most of the fitting close to the ceiling, leaving headroom clear below.

Can it be used in a bathroom?

No. The IP20 rating means the fitting has no protection against moisture and must be installed in dry indoor rooms only. For bathrooms you need a fitting rated IP44 or higher.

Is the Halion dimmable?

Yes, provided you fit dimmable GX53 bulbs and pair the fitting with a compatible dimmer switch. LED bulbs vary in dimmer compatibility, so check the bulb packaging before purchasing.